If you have ever wrestled a manual shutter down at 11pm in the rain, you already know the main selling point of an electric shutter door. You press a button and it does the work. But the right electric shutter for a takeaway on a busy high street is very different from the right one for a garage in Ilford or a loading bay in Barking.

At East London Metal Engineering Ltd, we survey, make and fit roller shutters for shops, homes, warehouses and industrial units across London. This guide covers what we explain on almost every visit: the types of electric shutter doors, how the motors work, what the council may say, what it costs and how to keep it running.

What is an electric shutter door?

An electric shutter door is a roller shutter that opens and closes with a motor instead of a pull-down pole, strap or hand winder. It is made of horizontal slats, called laths, that link together to form a curtain. When you open it, the curtain rolls around a barrel inside a box at the top of the opening. When you close it, it runs down two side guides and locks shut.

The motor turns the barrel. You control it with a key switch, a push button, a remote fob or, on newer systems, a phone app.

That simple set-up is why electric shutter doors are everywhere: shopfronts, garages, warehouse doors, serving hatches, patio doors and the back doors of commercial kitchens.

Which type of electric shutter door do you need?

The type of lath decides how secure, warm and planning-friendly your shutter is.

Shutter typeWhat it isBest forKeep in mind
Solid single-skin steelPlain galvanised steel lathsWarehouses, back doors, side entrances, garagesStrong and good value, but councils often refuse it on shopfronts
Insulated (double-skin)Two skins of aluminium or steel with foam insideGarages, heated warehouses, homesKeeps heat in and cuts noise, costs more than single-skin
PerforatedSteel laths with small punched holesShopfronts where some light and visibility is wantedSome councils still treat it like a solid shutter
Open grilleOpen mesh or tube-and-link patternHigh street shops, especially in conservation areasYou can see into the shop at night, which councils prefer

If you are not sure which one fits, think about three things: what you are protecting, whether the space is heated, and whether the shutter faces a public street.

How electric shutter motors work

There are two main motor types, and the right choice depends on the size and use of your door.

Tubular motors sit inside the barrel, so you don’t see them. They are quiet, neat and the usual choice for garages, windows, patio doors and smaller shopfronts.

Direct drive (external) motors sit on the side of the barrel. They are used on larger and heavier commercial doors, such as warehouse entrances and loading bays, where the door opens many times a day.

Whatever the motor, always ask one question: how do I open it in a power cut? A good electric shutter door has a manual override, usually a winding handle, a chain or an internal release. If the shutter is your only way in, make sure you have a way to open it from outside, such as a key switch with battery backup.

Do you need planning permission for an electric shutter door in London?

This is the part most companies skip, and it catches shop owners out all the time.

For a garage, warehouse or the rear of a building, an electric shutter door usually doesn’t need planning permission. A shutter on the front of a shop is a different story. Fitting an external shutter box and shutter to a shopfront normally needs planning permission, and many London councils are strict about it.

A few real examples of council policy:

  • Tower Hamlets encourages open mesh grilles, or perforated shutters fitted inside behind the fascia, and says external shutter boxes are normally not permitted.
  • Croydon says it will not accept external solid shutters or perforated/pinhole shutters on shopfronts.
  • Camden has refused solid shutters and issued enforcement notices requiring shop owners to remove them.
  • Richmond resists solid and perforated roller shutters on shopfronts across the borough.

The cost of getting it wrong is real. An enforcement notice can force you to remove the shutter and make good the shopfront, so you pay twice.

Our advice: if your shutter faces a high street, check your council’s shopfront guidance before ordering, or let us look at it at the survey stage. An internal shutter behind the glass, or an open grille, is often the option that gets approved. If you are in a conservation area or the building is listed, you will also need the relevant consent.

How much does an electric shutter door cost?

Every shutter is made to measure, so the only accurate price is one based on your opening. As a guide, using 2026 UK cost guides:

JobTypical supplied and fitted price
Electric shutter for a domestic window (up to about 1.5m wide)around £700 – £1,400
Electric shutter for patio doors (2–3m wide)around £900 – £1,800
Electric roller garage door (single garage)around £900 – £2,000
Shopfront or small commercial shutter (manual)around £1,200 – £3,000, with electric operation adding to this
Insulated industrial electric shutteraround £2,500 – £6,000+
Large warehouse or loading bay electric shutteraround £6,000 – £12,000+

What changes the price:

  • Width: width drives the cost far more than height, because wider doors need heavier laths and stronger motors
  • Lath type: single-skin is cheapest, insulated and perforated cost more
  • Motor and controls: a key switch is cheaper than remotes, photocells or app control
  • Finish: powder coating to a RAL colour adds cost but lasts much longer
  • Power supply: if there is no electric supply near the opening, a new circuit adds to the job
  • Access: working at height or fixing into weak brickwork adds labour

Repairs are worth knowing about too. Once installed, a routine service typically costs around £90 to £180, and replacing a tube motor about £350 to £700. London labour usually sits at the higher end.

Real examples from London premises

These are situations we come across all the time, and how an electric shutter door works out in each.

A takeaway closing late. The owner has a manual shutter that sticks halfway and needs two people to pull down after midnight. Swapping to an electric shutter with a key switch outside means one person can lock up in seconds. If the shutter faces the street, we check what the council allows before replacing like for like.

A high street shop in Tower Hamlets. A new tenant wants a solid steel shutter for maximum security. Given the council’s guidance, an internal perforated shutter behind the glass, or an open grille, is far more likely to be approved. The shop keeps a window display at night, and the owner avoids an enforcement notice.

A garage with a short drive in Ilford. An old up-and-over door swings out and blocks the car. An insulated electric roller garage door rolls straight up into a box, so you can park right in front of it. The insulation also keeps the garage warmer if it doubles as a gym or storage room.

A warehouse loading bay in Barking. The door opens dozens of times a day for vans and forklifts. This needs a heavy-duty shutter with a direct drive motor, safety edges and photocells so it stops if anything is underneath, plus a manual override for power cuts.

A ground floor flat with patio doors. The owner wants extra security when away and privacy at night. Slim insulated electric shutters on the patio doors, controlled from a remote, give both without bars on the windows.

Safety: what a proper installer should give you

A powered shutter is a heavy moving curtain of metal. On commercial and industrial sites, a powered door is classed as machinery, and the rules are strict for good reason.

A proper installer should:

  • Fit a safety edge on the bottom rail and photocells where needed, so the shutter stops or reverses if it meets an obstruction
  • Measure and record the closing force and keep it within safe limits
  • Give you the right marking (UKCA or CE), a declaration and handover documents
  • Show you how to use the manual override
  • Recommend a service schedule, because powered doors should be serviced and force-tested regularly

If a quote doesn’t mention safety edges, photocells or force testing, ask why.

Looking after your electric shutter door

Most shutter call-outs we attend could have been avoided with a few simple habits.

  • Keep the side guides clean. Grit, leaves and litter in the guides make the motor work harder
  • Never hold the button down to force a shutter that is catching. Stop and find the cause
  • Don’t let staff lean bikes, bins or stock under the shutter line
  • Book a service once a year, more often for busy commercial doors
  • Know where the manual override is before you need it

If you’d rather not think about it, our maintenance contracts cover regular checks, and our roller shutter installation and repair team handles breakdowns, motor faults and damaged laths.

Why choose East London Metal Engineering Ltd for your electric shutter door?

We are a metal fabrication company first, which makes a difference when the opening is awkward, the brickwork is weak, or the shutter needs to work with other steelwork.

  • Every shutter starts with a site survey, and we can provide CAD drawings and 3D visuals before anything is made
  • Roller shutters are made in galvanised steel or aluminium, in manual or fully motorised versions, including insulated models
  • Powder coated finishes in a range of colours to match your shopfront or building
  • Remote control and smart control options
  • We also make metal security doors and grilles, useful where a grille suits the planning rules better than a solid shutter
  • Maintenance contracts and fast repairs, including lath and panel replacement

We work across London and the wider UK, for shops, restaurants, homes, warehouses and industrial units.

Want a price for an electric shutter door? Book a free site survey and quote. Call 079 5167 3924, email info@eastlondonmetal.com, or visit our roller shutters page.

Frequently asked questions

Can my manual shutter be converted to electric?
Often, yes. If the laths, guides and barrel are in good condition, a motor and controls can be added. If the curtain is bent or the guides are worn, a new electric shutter door is usually the better spend.

Do I need planning permission for an electric shutter door?
For garages, warehouses and the rear of buildings, usually not. For an external shutter on a shopfront, you normally do, and many London councils resist solid or perforated external shutters. Check your council’s shopfront guidance first.

What happens to an electric shutter door in a power cut?
It stays where it is. You open or close it using the manual override, such as a winding handle, chain or internal release. Some systems can run on a battery backup.

Are electric shutter doors safe?
Yes, when installed properly. Safety edges and photocells stop or reverse the door if something is in the way, and the closing force should be tested and recorded at handover.

How long does an electric shutter door last?
A well-made galvanised or aluminium shutter can last for many years. Motors and moving parts wear faster on busy commercial doors, which is why an annual service is worth it.

Is an insulated electric shutter worth the extra cost?
If the space is heated or used every day, such as a garage gym, a home or a warehouse with staff working inside, yes. For an unheated store or a back door, a single-skin shutter is usually enough.

Can I control my electric shutter door from my phone?
Many modern shutters can be fitted with app or smart control, so you can open and close them, or check they are shut, from your phone.